Tree Cabling - Peoria, Illinois
When to Consider Tree Cabling in Peoria Do you have a property that hosts a beautiful, aged tree that splits in several spots? Trees that grow without pruning can have several trunks. Each time a tree trunk splits, it creates a weak point in the tree. Weak points can be damaged when excessive force is exerted on the limbs from wind, ice, or snow. If you have an older tree with multiple trunks, contact your arborist for a tree cabling consultation today! Tree Cabling - How It Works Tree cabling works by tethering two or more tree limbs together, reducing the force exerted on the split in the tree. Placing tethers near weak points in the tree improves the tree's integrity. Supporting the load-bearing limbs helps to inhibit excessive movement during extreme conditions. Ice and snow can add excess weight to limbs, weighing them down exerting force on the split. Wind adds excessive movement near the split. A combination of these factors can result in the split cracking and trunks breaking away. Why Tree Cabling is Important When a trunk breaks away, it exposes the tree's inner wood. Once the wood is exposed, the tree is at risk of disease or infestation, leaving its overall health at stake. Use tree cabling as a preventative measure to protect your tree from damage. Not only is tree cabling is a preventative measure but also a preservative measure. If a tree loses a limb, it may not cause catastrophic damage. A single trunk loss can cause the tree to become lopsided or unbalanced. Tree cabling may support the remaining limbs, provide a more aesthetic appearance, and preserve the tree. In some cases, your tree specialist may use a bracing system, tethering the tree to another tree or the ground. Your arborist can discuss all of these options with you once they evaluate the situation. Tree cabling can not bind broken or damaged trees back together. If a tree is deemed unsafe, it must be removed by your tree specialist. Protecting Communities and Assets When large trees are close to homes, buildings, or pathways, tree cabling can protect people and their assets. Properly supporting tree splits can help prevent trees from breaking and falling on houses or walkways. It is highly recommended to secure trees on your property that may hang over walking or bike paths with cabling for safety. Choose an Arborist for Tree Cabling in Peoria Proper installation of tree cables is essential to the health of the tree. Improperly performed tree cabling can cause more harm than good. There are two types of cabling systems, static and dynamic. Static techniques use steel cables and anchors. Arborists drill anchors into the tree's limbs and attaching the wires to the hardware. Dynamic processes are non-invasive and use rope style materials to anchor each limb to one another. Static cabling has been used since the 1900s. It is invasive; however, considered sustainable. When improperly installed, dynamic tree cables can grow into the tree's bark, sometimes, even deeper into the tree's life-giving layers. When the ropes grow into the tree, it is called girdling. Girdling can lead to tree death as the life-giving layers become damaged. Choosing A Specialist Arborists can also help you decide which type of tree cabling is right for your tree. How the tree reacts in its environment will determine what system is best for the tree. Tree cabling is not a permanent no maintenance solution. Tree cabling needs to be regularly inspected by your arborist to ensure its performing correctly and does not inhibit the tree's growth. Your cabling may need to be adjusted from time to time to provide sustainable support for your tree. Your arborist will define the most appropriate time frame. For more information about tree cabling in Peoria and the surrounding areas, contact us today! 309-273-1100 Comments are closed.
|